Locally manufactured from recycled plastic, Renderplas PVC clip on edge beads / board stops are designed for plasterboard and cement board to provide protection to edges and a superior finish. On plasterboard at edges formed at door frames, windows and skirting boards or at a change of finish; on cement board at the exposed edge of the system
The National Insulation Association
NBS Plus
To provide protection to edges and reduce cracking whether with skim plaster or tape and joint applications at door frames, windows and skirting boards or at a change of finish; to provide a smooth edge to cement board
Zero chemical reaction with water, sand and cement, acrylic render, water based paint; avoid organic solvents, chlorate bleach, strong acids and alkalis
Impact resistant; dissipates shock waves; outlasts metal; cleaned or painted in same way as plaster or render
PVC beads are faster to cut and fix than steel and are guaranteed not to stain of corrode in damp situations. They reduce casual damage on site and impact damage when fitted
Locally manufactured; high recycled content; fully recyclable; low Ecopoint score of 0.004/kg delivered
Class 1Y. Combustible within fire source, self extinguishing upon removal of flame, will not contribute to the combustion of the system
PVC beads are safe to handle removing the dangers of cut metal; suitable for prisons and schools
Ideal for all habitable conditions
Fit for purpose for at least 25 years
13mm gap opens out when board is inserted to form a good fit
Ecologically benign; non-hazardous in water; non-hazardous if ingested; does not release substances into the atmosphere
PVC beads offer superior resilience to impact
Not affected by weather and should be specified in all regions of high moisture or high salt
EB15
Manufactured to ISO 9001:2000; Complies with BS EN 13914-1&2:2016; Fire Tested to BS 476; Complies with REACH
Renderplas
15mm PVC Plasterboard Edge Beads (Board Stops)
Exterior grade impact resistant UV stable unplasticised PVC
18mm edge and 24mm wing
13mm to 15mm board
5.7
White
2.5m
25 lengths in fibreboard tubes; 50 lengths in triwall boxes
Cut lengths
109.60
100.0%
UV stable; any discoloration is uniform over a single facade and within industry standards
Standard industry practice and tools can be used. Cut to length with tin snips or fine tooth saw. Non-corrosive mechanical fixings should be used
Store vertically out of direct sunlight or extreme temperatures. Can be stored flat if supported along entire length
Ex-stock next day delivery to site through extensive supply chain or direct from www.renderplas.co.uk