Telephone: +44 (0) 1299 888333 | Email: firstname.lastname@example.org
Technical trade enquiries
T +44 (0)1299 888338
Edge beads are designed to finish edges on plasterboard and panels used internally. They butt up to the edge of the board or panel and provide a lip for skimming to give a sealed, clean, straight and finished edge.
EIFS is short for Exterior Insulation and Finishing Systems. These are complete systems often comprising of several materials, layers or proprietory products that finish and insulate external walls.
Elastomeric coating is usually an acrylic or pliolite based external wall covering such as a thin coat render or paint that makes a decorative, flexible and waterproof coating.
ETICS is the abbreviation used for External Thermal Insulation Composite Systems. Multi-component insulation systems designed to improve the energy efficiency of new and existing buildings.
EWI is short for External Wall Insulation. A term usually given to complete insulation systems created by manufacturers of wall insulation products. But the term can also be applied to external wall coverings such as render.
An expansion bead is a bead designed to bridge two surfaces at a gap or joint that expands and contracts in line with the expansion and contraction of a construction preventing such movement from cracking any finish applied to the surfaces.
The external curtain of a building refers to the external walls that form the perimeter of a building.